GT320 – #5/8 -0.8mm

Description

Aesculap ref: GT320
Cuts to: 0.8mm
Cutting face width: 13mm
Chrome plated finish.

A “Toe” blade for smooth velvet finish.

This blade is identical to the Oster #5/8 in cutting length.

These blades, of which there are two sizes – #5/8 and #7/8, are in the main used for the purposes of designing pattern trims.

Ideal for close cutting for trims and finish purposes, they vary only in the cutting width, which in the case of the #5/8 is just under five eighths of an inch. (13mm)

Normally when used they will resemble the blade size #15 as far a cutting depth is concerned, and if applied against the grain of the coat will represent the cut of the #30 blade.

Many groomers will use them for the feet of many breeds especially Poodles, and they are popular for use on Schnauzer ears and for the top and around the nose area of the Poodle muzzle.

Can be also used for the trimming of hairs in the ears of both cattle and horses, or for any intricate work in tight areas.

Comb attachments are not usually fitted to this type of blade nor are they consider suitable.

Supplied in hard plastic and lasting presentation case – a hallmark of Aesculap quality!

N.B.
This blade will fit all types of clippers, which accept detachable A5 type blades including
Aesculap model: FAV5
Andis models: AG/AGC/AGR/MBG
Heiniger model: “Saphir”
Laube models: 503/513/505/553/555/573/Lightening/Micro models
Moser models: KM1/Max 45/Avalon/Artiko
Oster models: Oster A5/Oster Power Pro
Thrive models: 9000N/50 range
Wahl model: Switchblade